HELMET SIZING
HOW TO FIT A HELMET AND THE CHIN STRAP SYSTEM:

First, to find the correct size, measure the crown of your head in centimeters, the chart below tells you which size you should be using.

The best way to put on the helmet is to hold the chin straps to each side before pulling it over your head.
Pass the end of the strap through the D-rings and pull it snug.
Keeping your head straight, rotate the helmet from side to side with your hands.
If the helmet is adjusted properly, you should feel the movement of your scalp closely match the helmet's movement.

With your hands on the sides of the helmet, move the helmet in a slight up and down motion.
Once again, the movement of your skin should follow the helmet movement.
If the helmet moves too freely try a size smaller, alternatively, if the helmet is too tight and uncomfortable then try on a larger size.

To remove the helmet, pull the D-ring tab outward to release strap tension, then unthread the chin strap.
Pull the chin straps outward, rotate the helmet forward and lift it off.

APPROXIMATE SIZING CHART

PLEASE NOTE:

• For maximum protection, the helmet must provide adequate peripheral vision.
• All chin straps must be securely fastened.
• The helmet can be seriously damaged by some common substances with damage being invisible to the user. Apply only mild soap and water for cleaning.
• Please do not make any modifications to the helmet. If the helmet experiences a severe blow, please replace it.